The GR86 wheel spacers are sandwiched by the vehicle hub and wheels, therefore they reduce the distance from the wheel center to the hub assembly. Essentially, the Toyota rim spacers subtract the offset. As a rule of thumb, a 20mm spacer is approximate -20mm offset. The less the offset, the more the wheels will stick out from the wheel hub.
Each time when changing tire width, it is a good idea to consider a set of proper GR86 wheel spacers to make the offset correct. As long as you use a quality set and install them correctly, the wheel spacers are no different than low-offset wheels. Here are some tips to help you install GR86 wheel spacers safely.
Top 5 Pro Tips to Install GR86 Wheel Spacers Safely
Clean Hubs:
During the installation process, some people may leave rust on the rotors, and not rechecking torque initially. This will cause problems. It is highly recommended to make sure the vehicle hubs are clean and smooth
Apply Anti-seize:
If you frequently go racing, it is a good idea to use anti-seize on those spacers. Make sure the nuts and studs are clean and free from oil or dirt.
Proper Torque:
The REFERENCE torque specs on the GR86 wheel spacers will be 83.3 ft-lbs (113 Nm). Set a torque wrench to the proper torque and then tighten each lug nut in a “star” sequence. This ensures your car is safe and reliable.
Check Tire Rubbing:
After installing GR86 wheel spacers, park the car on flat ground, rotate the steering wheel to one extreme position, and inspect the wheel well to check whether there are rubbing signs.
Re-torque Spacers:
It is always a great idea to re-torque the wheel spacers after 50-100 miles of driving. Regularly inspect the tightness of the lug nuts.
What Are the Best GR86 Wheel Spacers for Sale?
High-end wheel spacers are produced with top-quality materials to provide optimum performance to the vehicle. For example, BONOSS forged active cooling GR86 wheel spacers are made of advanced machinery and undergo a series of safety tests before leaving the factory. BONOSS offers several key advantages that make their spacers a top choice.
1. Active Cooling for Safe Upgrades
BONOSS forged active cooling GR86 wheel spacers are helpful in improving brake cooling efficiency. The heat dissipation grooves send the external cold air to flow continuously inside the wheel spacer when it rotates. The air takes away the heat to actively dissipate heat for the braking system. This boosts the cooling efficiency, reducing brake thermal decay, and improving road safety.
2. Stronger Fasteners for Improved Safety
BONOSS forged active cooling GR86 wheel spacers come with ISO grade 12.9 wheel studs. These wheel studs are approved by SGS and TÜV:
- Tensile strength≥ 1,220 MPa;
- Limited life range test≥ 2,000,000 stress cycles without damage;
- Ultimate tensile load≥ 152,000 N;
- Hardness (HV)≥ 395;
- Neutral Salt Spray≥ 500H.
Arguably, a stronger retention power on the wheel is necessary to properly secure the spacer and wheel in place.
3. SGS TUV Tested for Guaranteed Safety
Made of advanced machinery and undergone a series of safety tests, BONOSS forged active cooling GR86 hub-centric spacers are approved by over 75 SGS TÜV test reports. These SGS TÜV-certified wheel spacers are completely safe and legal to use.
Frequently Asked FAQ
Q: Can I double up wheel spacers?
A: It is NOT recommended to put one spacer on top of another. Using a single wheel spacer is the best way to ensure safety.
Q: Do I need an alignment after GR86 wheel spacers?
A: Adding wheel spacers won’t mess up alignment. So, you don’t need an alignment if you just install spacers on a Toyota GR86.
Q: Are universal wheel spacers safe?
A: It is NOT a good idea to use universal wheel spacers on a Toyota GR86. Brand manufacturers (like BONOSS) will make vehicle-specific wheel spacers.
Final Verdict: Elevate Your Car with BONOSS
With these outstanding advantages, it’s clear that BONOSS forged active cooling GR86 wheel spacers offer exceptional safety, durability, and professionalism. Whether you’re upgrading the aesthetics or improving the handling, choosing BONOSS ensures that you’re getting a product that meets the highest standards of performance and quality. Your car deserves the best.
(Hi, I’m Kevin Brian, an experienced mechanical engineer. All articles, images, and videos are human-produced to ensure the best user experience. They are not generated by Artificial Intelligence (AI) Models or tools.)
