If you have basic mechanical proficiency, you can install 2024 Toyota LC300 wheel spacers yourself and save money. It is not difficult and some experienced people can complete it within an hour. High-quality 2024 Toyota LC300 wheel spacers are exactly safe but only if you install them properly. Using the manufacturer’s recommended torque helps guarantee that there isn’t either too much or too little pressure on any of the assemblies to which the wheel attaches. The REFERENCE torque spec of 2024 Toyota LC300 wheel spacers would be 103.5 Ft-tb (140NM) for aluminum wheels (always inquire with a tire expert before operating).
A torque wrench is always the best tool to fasten your 2024 Toyota LC300 wheel spacers. Make sure that the stud threads are clean and dry with no oil or grease. Start threading the hardware by hand, then use the torque wrench to tighten wheel lug nuts in a crisscross sequence. Never trust an impact gun can settle everything down. Because it is hard for an impact gun to ensure each wheel nut is evenly tightened with the same torque. For decades, many well-known wheel fabricators have provided wheel spacers with no concerns. As long as you use quality 2024 Toyota LC300 wheel spacers, your vehicle will be fine for years without an issue.
Do 2024 Toyota LC300 Wheel Spacers Break Studs?
Since the 2024 Toyota LC300 wheel spacers are bolted onto the vehicle wheel studs, many people worry that spacers may break studs, Actually, no, the load from the wheel is transferred to the axle/hub through the friction of the clamped joint, not through the wheel studs. And the wheel studs can only break if the lug nuts are not properly torqued. In other words, by properly torquing genuine brand 2024 Toyota LC300 wheel spacers, there will be no problems.
BONOSS provides ISO grade 12.9 wheel studs to ensure quality exceeds OEM standards. High-strength wheel studs and nuts ensure a strong wheel-spacer-hub connection. The provided wheel studs of BONOSS forged active cooling 2024 Toyota LC300 wheel spacers are made of high-strength forged SCM440 alloy steel. They have achieved ISO standard grade 12.9, tensile strength≥ 1,220 MPa, ultimate tensile load ≥ 152,000 N, and hardness (HV) ≥ 395. Equipped with such high-strength hardware, these BONOSS forged active cooling 2024 Toyota LC300 wheel spacers won’t break easily.
Do 2024 Toyota LC300 Wheel Spacers Hurt the Suspension?
Quality brand 2024 Toyota LC300 wheel spacers won’t hurt the suspension. In fact, they are no different from a wheel with low offsets. In other words, spacers cause no more damage than offset wheels. After installing 2024 Toyota LC300 wheel spacers, park your SUV on flat ground, rotate the steering wheel to one extreme position, and inspect the wheel well of the tire that’s outside. If there are not any rubbing signs, then these 2024 Toyota LC300 wheel spacers will not damage your vehicle.
BONOSS forged active cooling 2024 Toyota LC300 wheel spacers are CNC machined, precision at 0.02mm tolerance. This improves the fit and functionality of spacers. High-precision 2024 Toyota LC300 wheel spacers also look better. For instance, a wheel spacer with a high-quality surface is easier to sit flush up against the vehicle hub and wheel. So, there’s no obvious gap between the wheel hub and the spacer. This is helpful to avoid high-speed wheel vibration. That is to say, BONOSS forged active cooling 2024 Toyota LC300 wheel spacers don’t hurt your vehicle.
