When fitting bigger tires, wheel experts recommend the use of Subaru Baja wheel spacers. Bigger wheels and tires require more space to settle, so it makes sense to add 5×100 wheel spacers to create more clearance at the same time. With the help of Subaru Baja wheel spacers, you’ll stop the wheels from rubbing the suspension components. Besides, they will make your car look more aggressive by spacing out the tires.
When choosing the best Subaru Baja wheel spacers for your truck, there are a few common factors motorists can learn about. For example, the material determines the maximum performance that the Subaru Baja wheel spacers can offer. Most importantly, the proper thickness will ensure there is no annoying rubbing issue. Some well-designed Subaru Baja wheel spacers can provide additional advantages.
How Thick Subaru Baja Wheel Spacers Do I Need?
The basic application of the Subaru Baja wheel spacers is to create extra space between the wheel and the existing hub assembly. So, you need proper thickness to make the spacers work well. It is better to do some measurements. Use a straight-edge ruler to measure the distance between the inner fender lip and the outside edge of your wheel tires or rims. This distance is the perfect thickness of Subaru Baja wheel spacers to get the wheels flush with the fender and the maximum amount that wheels will not rub the wheel well.
The 6061-T6 and 7075-T6 aluminum Subaru Baja wheel spacers are the most popular spacers available because of their good strength, toughness, hardness, and corrosion resistance. They are designed for daily commuting as well as off-roading events. All BONOSS Subaru Baja wheel spacers are made of top-quality forged 6061-T6 and 7075-T6 aluminum alloys. The tensile strength is up to 572 MPa and the yield strength is up to 503 MPa. The higher the strength, the better the performance.
What Kind of Subaru Baja Wheel Spacers Are Good?
In order to improve the user experience, BONOSS Subaru Baja wheel spacers are machined with disassembly grooves. These grooves refer to the small notches which are distributed on the corner of wheel spacers. Normally, the notches leave limited clearance between the brake rotors and BONOSS Subaru Baja wheel spacers. When removing the spacer, a screwdriver is enough to separate the spacer from the axle hub easily and efficiently.
In addition, these disassembly grooves also act as air-collecting funnels, which is effectively increasing airflow, and enhancing the heat dissipation effect. What’s better, BONOSS Subaru Baja wheel spacers come with seal-designed grooves, effectively preventing rainwater and debris from entering the vehicle hub. So, by installing such BONOSS Subaru Baja wheel spacers, you don’t need to worry about rust or debris entering rotor mating surfaces.
