Normally, Toyota Land Cruiser Prado 1.25” wheel spacers will add approximately -32mm offsets. Giving an example, if you get +57mm offset rims, then 1.25” spacers change the offset to +25mm (57mm – 32mm = 25mm). Simply put, the Land Cruiser Prado 1.25” wheel spacers are almost the same as many low-offset wheels. The best part is that a set of quality Prado 1.25” wheel spacers can provide a similar effect as offset rims but cost less. The wheels are further away from the suspension, which gives your Toyota Land Cruiser Prado a more muscular and aggressive look.
Besides wanting a better appearance, people want their off-roading SUVs to perform better too. If you add Land Cruiser Prado 1.25” wheel spacers, then the track width will increase by about 2.5 inches. For many 4WD SUVs, this means more stability and grip which is good for cornering. Both right spacers and offset wheels make sure your new wheel design has enough clearance on your vehicle so that nothing rubs up against the suspension, fenders, or brakes. If you cannot afford a set of low-offset wheels, then Land Cruiser Prado 1.25” wheel spacers may be a better option.
Do Land Cruiser Prado 1.25” Wheel Spacers Brand Matter?
Yes, when it comes to Land Cruiser Prado 1.25” wheel spacers, brands matter. It is proven that as long as you use high-quality 1.25” wheel spacers and install them properly, there will be no safety issues. Brands offer safety and reduce the risk of disappointment. BONOSS brand Land Cruiser Prado 1.25” wheel spacers strive to maintain top quality and the best user experience. Designed with longevity and consumer safety in mind, BONOSS promises an uncompromised fit, finish, and level of quality. These BONOSS forged active cooling Land Cruiser Prado 1.25” wheel spacers are made by a super forging process.
BONOSS forged active cooling Land Cruiser Prado 1.25” wheel spacers are made of the highest quality forged 6061-T6 and 7075-T6 aluminum. The super forging process adds strength and eliminates any porosity, shrinkage, and other micro-processes presented in the raw material. In addition, BONOSS forged active cooling Land Cruiser Prado 1.25” wheel spacers are CNC machined, precision at 0.02mm tolerance. This improves the fit and functionality of spacers. High-precision wheel spacers are easier to sit flush up against the vehicle hub and wheel. So, there’s no obvious gap between the wheel hub and the spacer. This is helpful to avoid high-speed wheel vibration.
Are Land Cruiser Prado 1.25” Wheel Spacers Easy to Remove?
You can remove Land Cruiser Prado 1.25” wheel spacers for changing tires or brakes. It is as simple as mounting a wheel. To make the removal process easier, BONOSS forged active cooling Land Cruiser Prado 1.25” wheel spacers come with disassembly grooves. The disassembly grooves leave a limited clearance between the brake rotor and spacer. When removing the spacer, place a screwdriver into the notch and then apply force at an angle, you can separate the spacer from the axle hub quickly and efficiently. Without such disassembly grooves, you probably have to work harder to remove the Prado 1.25” wheel spacers.
When removing BONOSS forged active cooling Land Cruiser Prado 1.25” wheel spacers, get a flat-head screwdriver and place it on one notch. Pound a hammer to the screwdriver at a 45-degree angle, and be gentle, but convincing, until it loosens. It should come off pretty easily. This is extremely good for protecting the wheel hub. In addition, for BONOSS forged active cooling Land Cruiser Prado 1.25” wheel spacers, the grooves also effectively increase airflow, hence enhancing the heat dissipation effect. The more air can flow through the cooling grooves, the better the heat dissipation.
