In the market, the prices of all-new 2025 Acura Integra Type S wheel spacers range from 125.99 to 263.99 USD. It depends on the thickness and the material you choose. Giving an example, in the same 20mm thickness, 2 pcs of 6061-T6 spacers is 131.99 USD and 2 pcs of 7075-T6 spacers will be 200.99 USD. Even if the same 6061-T6 aluminum material, the 15mm spacers are 125.99 USD and the 25mm spacers are 145.99 USD.
The 2025 Acura Integra Type S wheel spacers are sometimes a good solution to your fitment issues. Commonly, it is recommended to use wheel spacers that are between 15-25mm. But if you add a wide-body kit, depending on how much wheel gap you have, you may need up to 2-inch aero wheel spacers. These Integra Type S wheel spacers reduce the distance from the wheel center to the hub assembly, thus they subtract the offset.
What 2025 Acura Integra Type S Wheel Spacers Are Safe for Driving?
The safest spacers have high requirements for strength. The tensile strength is the ability of a spacer to resist tearing due to tension. The higher the tensile strength, the more tensile stress that the wheel spacers can withstand before failure. For example, the tensile strength of BONOSS forged active cooling 2025 Acura Integra Type S wheel spacers are up to 572 MPa (AL7075-T6), which is a good option for your daily driving or racing needs.
A fade occurs when the brakes heat up under long, hard applications. In this case, BONOSS forged active cooling 2025 Acura Integra Type S wheel spacers send air into the rotors to keep temperatures down. They come with active cooling grooves which allow the external cold air to flow continuously inside the wheel spacer when it rotates. The air takes away the heat, so it achieves the purpose of actively dissipating heat for the braking system.
What 2025 Acura Integra Type S Wheel Spacers Work Better?
The best 2025 Acura Integra Type S wheel spacers are the spacers that fit your vehicle totally. If you would like to run above 1-inch wheel spacers, bolt-on 2025 Acura Integra Type S wheel spacers are better. For example, BONOSS forged active cooling wheel spacers come with ISO grade 12.9 wheel studs. These BONOSS forged wheel studs approved by over 66 SGS TÜV test reports: tensile strength≥ 1,220 MPa, limited life range test ≥ 2,000,000 stress cycles without damage.
Additionally, these BONOSS forged active cooling Integra Type S wheel spacers come with ISO grade 10 wheel nuts. The minimum proof load of ISO grade 10 lug nuts is 1,100 MPa. They are strong and durable. Besides, the Dacromet-coating gives neutral salt spray resistances exceeding 500 hours. Most importantly, Dacromet coating does not induce Hydrogen Embrittlement, which means that strong components like wheel studs and nuts can be safely coated.
