For a tough and reliable 4×4 built, proper size 2023 Mitsubishi Pajero wheel spacers are one of the most useful wheel accessories. Generally, spacer size and design directly affect the performance of your SUV. Therefore, it requires some basic measurements. Take a straight edge and place it against the outermost part of the rims/tires, then measure from the outside wheel to the fender line. If the value is 35mm, then 35mm 2023 Mitsubishi Pajero wheel spacers provide a perfect flush stance.
There are so many 2023 Mitsubishi Pajero wheel spacers out there on the market, so how do we start? A great first step is knowing the bolt pattern and the intended purpose of your ideal build. The bolt pattern determines whether the spacers fit your vehicle. For a 6-lug vehicle, if the bolt pattern circle diameter is 5.5 inches (139.7mm), then the bolt pattern of your 2023 Mitsubishi Pajero would be 6×5.5″ or 6×139.7mm. This is important. Because most brand 2023 Mitsubishi Pajero wheel spacers are vehicle-specific.
Should You Use Loctite on 2023 Mitsubishi Pajero Wheel Spacers?
Actually, it is optional to use Loctite on 2023 Mitsubishi Pajero wheel spacers. As long as you use quality wheel lugs and properly torque them, they will never come loose. If you don’t intend on removing the spacers after installation, then use Red Loctite. Red is permanent. But if you would like to use 2023 Mitsubishi Pajero wheel spacers for a certain period, Blue will be fine. Remember only use it on the studs holding the spacer to the hub (not the spacer to wheel studs).
Normally, it is not necessary to use Loctite on BONOSS 2023 Mitsubishi Pajero wheel spacers. Because BONOSS wheel spacers come with ISO grade 12.9 wheel studs and ISO grade 10 wheel nuts. This hardware is meticulously coated with Dacromet. It provides four-way corrosion protection strong enough to deliver superior, long-term resistance to the elements for fasteners. These BONOSS 2023 Mitsubishi Pajero wheel spacers are suitable for heavy-duty applications thanks to their high corrosion resistance.
Is It Hard to Remove 2023 Mitsubishi Pajero Wheel Spacers?
Removing the 2023 Mitsubishi Pajero wheel spacers isn’t hard. However, if you use Loctite on the wheel spacers, things may be a little troublesome when you intend to remove the 2023 Mitsubishi Pajero wheel spacers for routine maintenance. That is because the threadlocker will glue the studs and nuts together. It makes the removal process hard. But like any other adhesive, using a heat gun to melt it will be useful.
To make the removal process easier, BONOSS 2023 Mitsubishi Pajero wheel spacers come with disassembly grooves. The disassembly grooves refer to the small notches which are distributed on the corner of wheel spacers. Normally, a notch leaves a limited clearance between the brake rotor and the spacer. When removing the BONOSS 2023 Mitsubishi Pajero wheel spacers, get a flat-head screwdriver and place it on one notch. Pound a hammer on the screwdriver at a 45-degree angle. It should come off pretty easily.