The hex size of your Nissan Rogue lug nuts is 13/16”, so you would need a 21mm hex socket to fit. Whether you use a lug wrench, torque wrench, impact socket, or regular socket, you’ll need the correct size to remove or tighten Nissan Rogue lug nuts. Once the head of the lug nut is damaged it will be very difficult to remove it. Besides, when torquing the Nissan Rogue lug nuts, a high-quality socket is capable of withstanding certain forces. Getting the correct Nissan Rogue lug nuts properly torqued is the best solution.
During the installation, tightening the wheel nuts to the correct foot-pounds of force with a torque wrench is one of the most critical steps. For OEM Nissan Rogue lug nuts, the reference torque spec will be 113 Nm. Set the torque wrench to the manufacturer’s recommended value. Then simply turn the wrench handle until it reaches the torque mark. Tighten the wheel nuts a quarter turn at a time following the crisscross sequence (in a “star” pattern). Properly torquing all the wheel nuts ensures that your Nissan Rogue lug nuts are snugged up to the correct specifications.
Do I Need New Sockets for Nissan Rogue Lug Nuts?
BONOSS dual hex wheel sockets are designed for your Nissan Rogue wheel nuts and locks. This double-hex socket has dual 19mm (3/4 in.) and 21mm (13/16 in.) sizes of the hex socket heads. These dual-hex sockets provide two different hex adapters, allowing you to get into the right tight spots. So, it’s a good choice for properly torquing your new Nissan Rogue wheel nuts. Additionally, these high-quality steel sockets feature a black multi-layer finish which is not easy to corrode.
As long as you torque them correctly, genuine BONOSS Nissan Rogue lug nuts never come loose. Higher-grade lug nuts can bear more force and are not easy to break, which is why sometimes aftermarket wheel nuts are even safer than the OEM ones. To ensure safety, BONOSS provides new forged 50BV30 steel Nissan Rogue lug nuts which are ISO Grade 12. When torqued correctly, these BONOSS Nissan Rogue lug nuts can maintain high clamping force even under extreme operating conditions. Besides, closed-end BONOSS Nissan Rogue lug nuts can prevent rainwater and debris from entering the studs.
