In automotive world, install good quality Tacoma 4-inch wheel spacers is one of the most accessible and beneficial modifications. Wheel spacers increase the track width. A wider track means more grip in almost every application. Even if you don’t change the OEM tires, the more track width, the better the handling and rollover resistance.
High-end brand 4-inch wheel spacers are exactly safe if you install them correctly. Buy genuine brand wheel spacers, there will be no quality issues. Therefore, it is important to get your spacers installed by a professional. In this guide, we’ll delve into how to safely install 4-inch spacers for your Tacoma, and the best spacer brand.
6 Pro Tips to Install 4-inch Wheel Spacers Safely
Bolt Pattern:
If you use Toyota Tacoma aluminum spacers with stock wheels, make sure the bolt pattern is the same as the OEM one: Toyota Tacoma (2023-2026): PCD=6×139.7mm, CB=95mm, Thread=M14x1.5mm.
Clean Hubs:
During the installation process, some people may leave rust on the rotors, and not recheck torque initially. This will cause problems. It is highly recommended to make sure the vehicle hubs are clean and smooth
Apply Anti-seize:
If you frequently go off-roading, it is a good idea to use anti-seize on Tacoma 4-inch wheel spacers. Make sure the nuts and studs are clean and free from oil or dirt.
Proper Torque:
Set a torque wrench to the proper torque and then tighten each lug nut in a “star” sequence. This ensures your car is safe and reliable.
Check Tire Rubbing:
After installing 4-inch wheel spacers, park the car on flat ground, rotate the steering wheel to one extreme position, and inspect the wheel well to check whether there are rubbing signs.
Re-torque Spacers:
It is always a great idea to re-torque the wheel spacers after 50-100 miles of driving. Regularly inspect the tightness of the lug nuts.
Why BONOSS 4-Inch Wheel Spacers on Tacoma Stands Out?
With over 17 years of manufacturing experience, 1800+ drawing updates, BONOSS provides the best 4-inch wheel spacers on Tacoma. There are several key advantages that make BONOSS forged wheel spacers a top choice.
1. Verified Active Cooling Advantages
These BONOSS forged active cooling Tacoma wheel spacers are designed with petal-shaped grooves. The grooves allow the external cold air to flow continuously inside the spacer when it rotates. The air takes away the heat, actively dissipating heat for the braking system. If you intend to install performance brakes, BONOSS wheel spacers will give you a much better experience.
2. Top-quality Aluminum Alloy
Considering the strength and rustproof needs, billet aluminum is more suitable for off-roading use. BONOSS forged Tacoma 6-lug wheel spacers are made of forged 6061-T6 or 7075-T6 aluminum alloy. The tensile strength is up to 572 MPa (AL7075-T6). Such wheel spacers are strong enough to undertake hard driving.
3. Advanced Hub-centric Design
BONOSS forged hub-centric wheel spacers come with better multi-stage hub-centric lips. The hub-centric metal ring is machined to be multi-layers, and the bevels fit the corresponding hub flange, which means zero wheel vibration. This effectively guarantees safety, stability, and reliability in off-roading adventures.
Frequently Asked FAQs
Q: Can Tacoma 4-inch wheel spacers fail?
A: Reputable brand (like BONOSS) wheel spacers undergo thoroughly a series of performance tests to ensure they can handle scrutinous standards before leaving the factory.
Q: Do Tacoma 4-inch wheel spacers break studs?
A: Actually, no, the load from the wheel is transferred to the axle/hub through the friction of the clamped joint, not through the wheel studs.
Q: Do I need a pair of Tacoma wheel spacers?
A: Most dealers sell Tacoma 4-inch wheel spacers in pairs. This is because the same two spacers keep the wheels looking equally spaced in the wheel wells.
Final Verdict: Elevate Your Tacoma with BONOSS
With these outstanding advantages, it’s clear that BONOSS forged 4-inch wheel spacers offer exceptional safety, durability, and professionalism. Whether you’re upgrading the aesthetics or improving the handling, choosing BONOSS ensures that you’re getting a product that meets the highest standards of performance and quality. Your Tacoma deserves the best.
(Hi, I’m Kevin Brian, a 30-year mechanical engineer. For a better user experience, this article is original content uploaded by humans. It is not generated by Artificial Intelligence (AI) Models or tools.)
