Quality brand Tesla Model 3 Performance wheel spacers won’t hurt the suspension. In fact, they are no different from a wheel with low offsets. In other words, spacers cause no more damage than offset wheels. As long as these Tesla Model 3 Performance wheel spacers fit properly and are correctly torqued, there will be no issues. Just get the top-quality wheel spacers, and you can make the car perform better and look more stylish.
Professional mechanics will suggest adding proper-size Tesla Model 3 Performance wheel spacers because it directly influences a vehicle’s driving dynamics. After installing spacers, park the car on flat ground, rotate the steering wheel to one extreme position, and inspect the wheel well of the tire that’s outside. If there are not any rubbing signs, then these Tesla Model 3 Performance wheel spacers will not damage your vehicle.
Why Do You Need Tesla Model 3 Performance Wheel Spacers with Quality Hardware?
If you use Tesla Model 3 Performance wheel spacers, make sure the wheel studs are strong enough to keep everything in place safely. A stronger retention power on the wheel is necessary. Arguably, the higher the tensile strength, the more force that the wheel studs can withstand without breaking. BONOSS Tesla Model 3 Performance wheel spacers come with ISO grade 12.9 wheel studs. They are all approved by SGS and TÜV.
To ensure safety, BONOSS ISO grade 12.9 wheel studs will undergo a series of safety tests before leaving the factory. The results of those performance tests are great: tensile strength ≥ 1,220 MPa; ultimate tensile load ≥ 152,000 N; proof load ≥ 121,000 N. These SGS TÜV-certified wheel studs are completely safe to use. So, if you need a set of Tesla Model 3 Performance wheel spacers to upgrade your vehicle, these wheel studs are the best hardware for safety.
Can I Remove the Tesla Model 3 Performance Wheel Spacers Easily?
When upgrading to a new brake kit or Tesla Model 3 Performance wheel spacers of different sizes, it is required to remove the old spacers. Removing wheel spacers should not be hard, but a spacer can get stuck due to rust accumulation. When removing those stuck spacers, an incorrect operation may hurt the brake rotors. Brand spacer manufacturers spend much time, money, and resources to optimize the spacer design.
Considering this, BONOSS Tesla Model 3 Performance wheel spacers are designed with disassembly grooves. The disassembly grooves leave a limited clearance between the brake rotor and spacer. When removing the spacer, place a screwdriver into the notch and you can simply apply force at an angle to separate the spacer from the brake rotor. It should come off pretty easily. Done properly, running Tesla Model 3 Performance wheel spacers will be fine for years without any problems.
