As long as install them properly, high-quality Jetour Traveler 1.5 inch wheel spacers are exactly safe to run, even in off-roading events. During the installation steps, applying the manufacturer’s recommended torque helps guarantee that there isn’t either too much or too little pressure on any of the assemblies to which the wheel attaches.
The REFERENCE torque spec for Jetour Traveler 1.5 inch wheel spacers is 140 Nm (103.5 ft-lbs). While you’re eager to get those first miles on your aftermarket wheel spacers, it is necessary to confirm whether the installation is done correctly. It is also a good idea to retorque wheel lug bolts after driving 50 to 100 miles.
How to Install Jetour Traveler 1.5 Inch Wheel Spacers Correctly?
Properly installing Jetour Traveler 1.5 inch wheel spacers is simple and most knowledgeable customers can install them without problems. Following the installation guidance and using the right tools, you can install them within 1 hour. Here are some key tips:
- Park your vehicle on a level surface and engage the parking brake.
- Loosen the lug bolts on each wheel, but don’t remove them yet.
- Raise your vehicle using the jack and secure it with jack stands.
- Remove the wheel.
- Clean the hub surface and the backside of the wheel to ensure proper fitment.
- Place the wheel spacer onto the hub, ensuring it sits flush and aligns with the hub assembly lug holes
- Carefully remount the wheel, tightening the lug bolts initially.
- Lower the vehicle back onto the ground.
- Use a torque wrench to tighten the lug bolts in a star pattern.
- Repeat the process for the remaining wheels.
What Makes BONOSS Jetour Traveler 1.5 Inch Wheel Spacers the Best Choice?
Safety, precision, strength, and best experience are what sets BONOSS apart from other spacer manufacturers. All BONOSS forged Jetour Traveler 1.5 inch wheel spacers are built strictly to meet international standards that can improve the quality of your own driving experience. BONOSS offers several key advantages that make their spacers a top choice.
1. Active Cooling for Better Performance
BONOSS forged Jetour Traveler hub-centric wheel spacers are designed with heat dissipation grooves to make brake cooling better. The heat dissipation grooves allow the air to flow across the brake rotors. This boosts the cooling efficiency, reducing brake thermal decay. These BONOSS forged active cooling 5×108 spacers extend the longevity of your performance brake kits.
2. Aerospace Materials for Improved Strength
BONOSS forged Jetour Traveler 1.5 inch hub spacers are made of 6061-T6 and 7075-T6 aluminum alloys. The 6061-T6/ 7075-T6 aluminum alloy is high-quality aluminum that has excellent corrosion resistance and high toughness. The tensile strength is up to 572 MPa (AL7075-T6). They are strong enough to handle various driving conditions.
3. Hard Anodizing for Maximized Durability
BONOSS forged active cooling aluminum 1.5 inch spacers are hard-anodizing to resist corrosion so that they can work well for a long time without any problems. The oxide layer that follows the anodizing process offers excellent protection. The black dye will not fade easily. BONOSS forged Jetour Traveler 1.5 inch wheel spacers will serve you in the long run.
Frequently Asked FAQ
Q: Are Jetour Traveler 1.5 inch wheel spacers legal?
A: Generally, the Jetour Traveler 1.5 inch wheel spacers are legal and allowable in most countries and regions. High-quality wheel spacers (like BONOSS spacers) with proper installation are basically legal and safe.
Q: Can you fit 5×114.3 to 5×108?
A: Yes, by using a 5×108 to 5×114.3 wheel adapter, you can fit Jeep 5×114.3 wheels on a Jetour Traveler with 5×108 bolt pattern.
Q: How often should you tighten wheel bolts?
A: If you use Jetour Traveler 1.5-inch wheel spacers, it is crucial to re-tighten the wheel bolts after the first 50 to 100 driving miles. Then, just re-torque them every routine tire maintenance.
In Summary: Unlock More Wheel Options with BONOSS
From advanced active cooling advantages to customizable solutions and certified quality, BONOSS forged Jetour Traveler 1.5-inch wheel spacers are designed to provide a safe, reliable, and enhanced driving experience. Choose BONOSS and experience the difference—engineered for those who demand the best.
(Hi, I’m Kevin Brian, a 30-year mechanical engineer. For a better user experience, this article is original content uploaded by humans. It is not generated by Artificial Intelligence (AI) Models or tools.)
