It is usual for 2024 Mazda CX-90 wheel spacers to have wheel studs rubbing because some customers replaced the aftermarket wheels. The depth of the wheel pocket is not the same, resulting in 2024 Mazda CX-90 wheel spacers wheel studs that cannot be hidden in the wheel pocket. We can take three ways to solve this problem. 2024 Mazda CX-90 wheel spacers with rubbing tend to be 15mm thick and below. 2024 Mazda CX-90 wheel spacers are of the bolt-on type, which indicates that the wheel spacers will provide additional wheel studs and lug nuts for fixing, and the thickness of the wheel spacers will affect the protruding length of the stock wheel studs.
Trim the 2024 Mazda CX-90 Wheel Spacers Studs
Cut wheel studs can make 2024 Mazda CX-90 wheel spacers normal use. 15 mm 2024 Mazda CX-90 wheel spacers with rubbing can cut the excess wheel studs, measure the length of the wheel studs after installing the wheel spacers, then measure the length of the wheel studs after installing the wheel spacers, then measure the depth of the wheel pocket and subtract the length of the wheel studs to be cut, often only 2mm-4mm of wheel studs need to be cut.
Cutting with an angle grinder or file will work; after the cutting, you need to clean the burrs from the wheel studs and debris from the threads. Installing the 2024 Mazda CX-90 wheel spacers normally will give you a full body line. This method is not reversible since lug nuts must be installed based on the standard torque and installation safety turns. We prefer the second method if you want to remove the 2024 Mazda CX-90 wheel spacers and install them normally.
Thicker 2024 Mazda CX-90 Wheel Spacers
The thicker 2024 Mazda CX-90 wheel spacers will solve the problem of the stock wheel studs rubbing problem. The extra wheel studs will be hidden in the 2024 Mazda CX-90 wheel spacers and will not need to be cut. If you find that 15mm 2024 Mazda CX-90 wheel spacers are rubbing, measure the depth of the wheel pocket and the length of the wheel studs and choose 20mm or more wheel spacers.
You don’t need to worry about the thicker 2024 Mazda CX-90 wheel spacers causing spring weight problems. 2024 Mazda CX-90 wheel spacers are made of forged aluminum alloy, except for the fasteners of wheel studs and lug nuts which need forged steel alloy due to the force. The other parts are constructed of 6061-T6 or 7075-T6 forged aluminum alloy. The advantage is that it is lightweight, and the tensile strength can meet the safety requirements.
Slip-on 2024 Mazda CX-90 Wheel Spacers
It is a relatively rare type of 2024 Mazda CX-90 wheel spacer, which includes slip-on wheel spacers and aftermarket wheel studs by replacing the stock wheel studs to obtain long enough threads to support the installation of wheel spacers. It is less common because it requires the replacement of wheel studs, which requires professional guidance or assistance, and the labor cost is more expensive. However, its construction is safer than the bolt-on type 2024 Mazda CX-90 wheel spacers, which require higher performance of the wheel studs due to the clamping and shearing forces they are subjected to.
(Some photos come from our clients, if there is any infringement, get in touch with us immediately to delete them.)
