The Q60 wheel spacers are designed to push the wheels and tires out. There are many benefits when upgrading with wheel spacers. These metal components increase the track width. A wider track not only adds more stability but also makes your car look cooler. By pushing the wheels and tires outwards, the wheel spacers prevent tires from rubbing against the suspension components or fenders.
Mostly, installing Q60 wheel spacers doesn’t affect tire balance or alignment. If the tire balance was fine before, it will be fine after installing wheel spacers. Adding spacers is similar to changing to lower-offset rims. If you use quality ones and install them correctly, wheel spacers themselves don’t cause any problems. In this post, we will explore how to install Q60 wheel spacers safely.
How to Properly Install Q60 Wheel Spacers?
- Park your car in a safe, well-lit, level area, leave the wheels in contact with the ground;
- Prepare your new wheel and wheel spacer;
- Loosen all the lug nuts, lift the car and slowly remove the wheel;
- Cleaning the entire hub surface, ensuring it is clean and smooth;
- Place your car spacers on the hub and ensure that the spacer is firmly seated and flush against the hub;
- Tighten the spacer with the provided lug nuts to the vehicle hub to specific torque;
- The REFERENCE torque spec of the Q60 wheel spacers is 83.3 ft-lb (113 Nm).
- Install your wheel, use the stock lug nuts to secure it;
- Tighten the spacer with the matching lug nuts to the vehicle hub to specific torque;
- Repeat the above steps for the remaining wheels;
- Then your new wheels are safely installed on your car.
Pro tips: It is crucial to re-torque your new Q60 wheel spacers after the first 50 to 100 driving miles. Then, just re-torque them every routine tire maintenance.
Who Makes the Best Q60 Wheel Spacers?
When selecting the best Q60 wheel spacers, BONOSS excels in safety and performance. With the advanced technology and unmatched quality, BONOSS offers several key advantages that make their spacers a top choice.
1. Useful Active Cooling Function
With the same price as most rim spacers, BONOSS forged active cooling Q60 wheel spacers provide an active cooling function. Distributed in petal shape, these grooves allow the external cold air to flow continuously inside the wheel spacer when it rotates.
The air takes away the heat to actively dissipate heat for the brakes. Such BONOSS forged active cooling Q60 wheel spacers improve the cooling efficiency, reducing brake thermal decay, and improving road safety.
2. Forged Aluminum for Improved Durability
All BONOSS forged active cooling Q60 wheel spacers are made of top-quality 6061-T6/ 7075-T6 aluminum alloy. The tensile strength is up to 572 MPa, and the yield strength is up to 503 MPa (AL7075-T6). The forging process eliminates the porosity, ensuring structural integrity. This makes them not easy to break. With an advanced manufacturing process, BONOSS can offer all cars the perfect wheel spacers without any quality compromise.
3. Strong Fasteners for Enhanced Stability
When it comes to safe Q60 wheel spacers, wheel lugs are important. The provided BONOSS wheel studs are made of high-strength forged SCM440 alloy steel. These wheel studs are approved by over 75 SGS TÜV authoritative certification reports:
- Tensile strength≥1,220 MPa;
- Limited life range test≥2,000,000 stress cycles without damage;
- Ultimate tensile load≥152,000 N;
- Hardness (HV)≥395;
- Neutral Salt Spray≥500H.
Final Verdict: Upgrade Your Car with BONOSS
From innovative active cooling benefits to certified materials and precise manufacturing, BONOSS forged active cooling Q60 wheel spacers are engineered to enhance your driving experience with safety, strength, and reliability. Discover the difference with BONOSS—built for drivers who demand excellence.
(Hi, I’m Kevin Brian, an experienced mechanical engineer. All articles, images, and videos are human-produced to ensure the best user experience. They are not generated by Artificial Intelligence (AI) Models or tools.)
