If you’re looking for the 2024-2025 Acura Integra Type-S spacer and flush wheel fitment advice, here is a complete guide for you. This Integra wheel fitment guide contains tailored information for bolt pattern (PCD), center bore (CB), various sizes, offsets, and spacer selection specific to the Integra Type-S.
Let’s kick things off by looking at the OEM sizing:
Flush wheel spacer size: front 15mm / rear 15mm
Bolt pattern (PCD): 5x120mm
Center bore (CB): 64.1mm
Lug nut spec: M14x1.5mm
With wheel spacers ranging from 15mm to an aggressive 50mm, you can solve the tire rubbing issues easily and make your vehicle look nicer and cooler as well. These bolt-on Acura Integra Type-S spacers are ideal for the owner enjoying their car day-to-day on the street, and they are typically paired with new wheel studs and lug nuts. These Acura wheel spacers will improve the appearance and performance of the car without requiring extra modifications to the factory suspension or alignment. Just bolt on and enjoy!
What is the Bolt Pattern on a 2024-2025 Acura Integra Type-S?
Generally, the bolt pattern on a 2024-2025 Acura Integra Type-S is 5x120mm. Figuring out the correct bolt pattern (PCD) is the first thing when researching and shopping for wheel spacers. A bolt pattern, also known as the lug pattern, is a factor that determines whether the spacer or wheel can fit. For example, if the Acura Integra Type-S comes with a 5x120mm bolt pattern, you can’t put 5×114.3mm wheels on directly.
But this problem can be easily solved by a 5×120 to 5×114.3 wheel adapter. The wheel adapter is a special conversion wheel spacer that comes with two sets of wheel fasteners. One set is made to a 5×120 lug pattern and the other set is machined to a 5×114.3 bolt pattern. This 5×120 to 5×114.3 wheel adapter enlarges the wheel options for your 2024-2025 Acura Integra Type-S.
What is the Torque Spec on Acura Integra Type-S Spacers?
The REFERENCE torque spec of 2024-2025 Acura Integra Type-S wheel spacers would be 103.5 Ft-lb (140NM) (always inquire with a tire expert before operating). Before installing Acura Integra Type-S spacers, clean the wheel, hub faces and the center hole with a wire brush as well, then dry them. Then, tighten each spacer lug nut in a star pattern twice, smoothly applying force until the wrench clicks, but no further.
How Much Does an Acura Integra Type-S Spacer Cost?
Brand-new wheel spacers for your Acura Integra Type-S can range in cost from $125.99 to $263.99+, depending on the spacer size and material you select. Always choose genuine brand Acura Integra Type-S spacers. Because authentic brand wheel spacers have a reputation for delivering superior quality and performance. For example, at the same price as other spacers, BONOSS forged active cooling Acura Integra Type-S spacers come with an active cooling function.
Distributed in petal shape, these grooves allow the external cold air to flow continuously inside the spacer when rotating. The air takes away the heat, so it achieves the purpose of actively dissipating heat for the brakes. The knurling side eliminates internal stress and enlarges the cooling area which is good for the heat dissipating effect. Such BONOSS forged active cooling Acura Integra Type-S wheel spacers can boost the cooling efficiency, reducing brake thermal decay, and improving road safety.
Do I Need to Cut OEM Studs for Acura Integra Type-S Spacers?
This really depends. As long as the wheels have a deep cavity in the back, you don’t have to cut studs for the Acura Integra Type-S spacers. But it is safe to cut wheel studs for spacers as long as there is still enough thread length. Since the bolt-on spacer is secured by the OEM studs, and the wheel is fastened by the provided studs of the wheel spacer, grinding OEM studs to fit the wheel spacers will not shorten the thread engagement and weaken the strength.
What’s better, BONOSS forged active cooling wheel spacers come with ISO grade 12.9 wheel studs. To ensure safety, BONOSS ISO grade 12.9 wheel studs will undergo a series of safety tests before leaving the factory. The results of those performance tests are great: tensile strength ≥ 1,220 MPa; ultimate tensile load ≥ 152,000 N; proof load ≥ 121,000 N. They are all approved by over 66 SGS and TÜV authoritative certification reports. The BONOSS forged active cooling Acura Integra Type-S spacers are firmly secured, so there is less chance of vibration on the highway.
