Upgrading your BMW style with a new set of BMW G60 spacers is one of the easiest and quickest ways to give your vehicle a flush and distinct look. Just like many offset rims, wheel spacers can affect the car’s performance and visual impact. From racing track day to daily commuter comforts, there are many choices of wheel spacers for BMW 5 Series/ M5 wheel fitment.
This chart contains a list of BMW 5 Series G60 spacer ranges, including the latest bolt patterns (PCD), center bores (CB), wheel offsets, and spacer dimensions for specific wheel hubs. Hope this 2024-2025 BMW 5 Series wheel spacer fitment guide gave you an idea of what kind of fitment you’re looking for with the associated wheel spacer specs.
Here are the OEM sizes of this car:
Flush wheel spacer size: front 10mm or 12mm / rear 15mm or 20mm
Bolt pattern (PCD): 5x112mm
Center bore size: 66.5mm
Lug bolt spec: M14x1.25mm
Besides, it’s important to consider your personal preferences and the kind of suspension (stock suspension, lowering springs, coilovers, or air suspension). As for the suspension, the lower you are, the more complex it becomes to find the perfect spacer fitment. The same thing applies to bigger rims and wider tires.
What is the Bolt Pattern on a BMW 5 Series G60 Spacer?
The 2024-2025 BMW 5 Series G60 comes with a 5x112mm bolt pattern. Wheel fitment requires the bolt pattern of the wheel to match the vehicle. Wheel adapters change the bolt pattern (PCD). They allow you to put aftermarket wheels on regardless of the bolt patterns. Can I put BMW 5 series wheels on a 3 Series? With wheel adapters, this won’t be a problem.
How Much Should BMW 5 Series G60 Spacers Be Torqued To?
The REFERENCE torque spec of a BMW 5 Series G60 wheel bolt is 103.5 Ft-tb or 140 NM. It is recommended to start threading the wheel bolt on by hand so as to not strip the threads. Once secured hand tight, set a torque wrench to the proper torque. Then tighten each lug bolt in a “star” sequence. DO NOT lubricate hardware threads or seats. Because lubricating the hardware threads and seats can alter the friction, which could result in inaccurate torque application.
What Size Are BMW 5 Series G60 Spacers?
In the market, the sizes of BMW 5 Series G60 spacers are available in 3mm, 5mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, and above. Choosing the right spacer size and material is essential. The size of the spacer should meet your needs without causing rubbing issues. And the material should be of high quality to withstand the forces and stresses involved in driving.
In this case, we recommend BONOSS forged lightweight plus BMW 5 Series G60 wheel spacers. These BONOSS wheel spacers are machined with “Hollow Carved” holes. This design provides obviously lightweight effect while maintaining high strength. For example, a normal BMW 10mm spacer is 346g and a BONONSS hollow 10mm spacer is 251g. The weight is reduced by 113g (32.7% off). Such BONSOS forged lightweight plus BMW 5 Series G60 spacers never let you down.
Where is the BMW 5 Series G60 Wheel Lock Key?
If your BMW car comes with OEM wheel locks, then a special key may be stored in the glove compartment, center console storage, storage box, or trunk. If you add wheel spacers, then you need new extended wheel bolts to fit. For instance, if the OE BMW 5 Series G60 wheel bolt length is 27mm and you get a 12mm wheel spacer installed, it’s probably best to order 39mm bolts right away
To further boost the enjoyment of your ride, BONOSS exclusively supplies the forged shell-type wheel lock & bolt kit. This kit consists of ISO grade 12.9 wheel bolts and 7075-T6 colorful shells. The core wheel bolts are strong enough to undertake more road impacts (tensile strength over 1,282MPa). In addition, this bolt kit includes 20 pcs standard wheel bolts and 4 pcs spline drive wheel locks. Therefore, you can invest in a new BONOSS forged shell-type wheel lock & bolt kit to decorate and protect your finest wheels.
