One of the most popular modifications for the 2023-2025 Tesla electric truck is adding Tesla Cybertruck spacers. Generally, a Cybertruck comes with stock 20” wheels with +58.5 offsets. Fortunately, the Tesla Cybertruck mod component market provides many wheel accessories for your all-electric pickup truck. This allows you to build a more aggressive truck style.
This Tesla Cybertruck fitment guide covers factory flush spacer sizes, bolt pattern (PCD), center bore (CB), offsets, and spacer selection for you.
The 2023-2025 Tesla Cybertruck Spacer Size and Torque Chart:
- Flush wheel spacer size: front 30mm / rear 35mm
- Bolt pattern (PCD): 6×139.7mm
- Center bore (CB): 84.1mm
- Lug nut spec: M14x1.5mm
As long as you install them properly, the Tesla Cybertruck spacers have zero effect on your AWD system. Wheel spacers are designed to push the wheels and tires out. They don’t change anything about your all-wheel-drive system. Besides, quality aluminum alloy wheel spacers won’t significantly affect the driving range at all. In other words, if you just add Tesla Cybertruck spacers, there should be no difference before and after.
What Size Wheel Spacers Are Available on the Tesla Cybertruck Long Range?
In the market, the sizes of Tesla Cybertruck wheel spacers are available in 1 inch, 1.25 inches, 1.5 inches, 1.75 inches, and 2 inches and above. Brand-new wheel spacers for your Tesla Cybertruck start from $149.99 to $335.99. It depends on the spacer size and material you select. Going off-road with Tesla Cybertruck spacers is safe. But make sure they are strong enough to undertake fierce impacts. In case of this, forged wheel spacers are the priority.
What is the Torque Spec of Tesla Cybertruck Spacers?
The REFERENCE torque spec of the Tesla Cybertruck spacer would be 103.5 Ft-lbs (140NM). Each time your wheel is removed from the vehicle, you need to tighten and torque the lug nuts to the correct specs. When the lug nuts are torqued too tight, the studs may begin to stretch. If the lug nuts are not torqued enough, they may be loose while driving. Each vehicle has specific torquing specs for its wheel lug nuts. So, always inquire with a tire expert before operating.
When it comes to the safest Tesla Cybertruck spacers, wheel fasteners are very important. Generally speaking, high-strength wheel studs and nuts ensure a strong wheel-spacer-hub connection. In this case, BONOSS forged active cooling wheel spacers come with the ISO Grade 12.9 wheel studs and ISO Grade 10 lug nuts. These ISO grade 12.9 wheel studs have a minimum tensile strength of 1,220 MPa and the ISO grade 10 lug nuts have a proof load of 1,100 MPa. They are all over 66 SGS TÜV test reports certified.
Do Tesla Cybertruck Spacers Affect Towing Capacity?
No, the Tesla Cybertruck spacers won’t affect the towing capacity. High-quality forged aluminum alloy spacers can handle more force without breaking. As long as you use a high-quality set and install them properly, there will be no problems. For example, BONOSS forged active cooling wheel spacers are machined out of forged 6061-T6 billet aluminum and 7075-T6 billet aluminum. The tensile strength is up to 572 MPa and the yield strength is up to 503 MPa (AL7075-T6).
These BONOSS forged active cooling Tesla Cybertruck spacers simply bolt onto your electric truck and are compatible with all Cybertruck variations including the Cyber Beast. What’s better, these BONOSS truck spacers come with a global registered active cooling technique. Distributed in petal shape, these grooves allow the external cold air to flow continuously inside the wheel spacer when it rotates. The air takes away the heat. This boosts the cooling efficiency, reducing brake thermal decay, and improving road safety.
