Wheel stud conversion kit is favored by many customers as a product that changes the way from which lug bolts are fixed to the car to lug stud. The installation process of the stud conversion kit is very simple and can even be done at home. If you want to use wheel spacers with the stud conversion kit, you only need to add wheel spacers to the stud conversion kit installation, no additional lug bolts are needed for fixing. Here are the tools you need to prepare, please pay attention to safety during the installation process.
Tools
- A Set of BONOSS Titanium Stud Conversion Kit (20 Pics)
- Jack
- 19mm Socket
- 6mm Allen key
- Drive Ratchet
- Torque Wrench
Step 1:
Prepare to lift the vehicle using Jack, but leave the rims in contact with the ground. Use the OE lug bolt size socket to loosen all the lug bolts on the front wheels, but do not remove them, before the vehicle is off the ground.
Step 2:
Use Jack to lift and support the vehicle and remove all the lug bolts, then remove the rim. Please be careful, the OE rim may cut against the brake disc.
Step 3:
After removing the rim, you can use the designated cleaner to clean any corrosion or stains where the hub comes in contact with the rim, and you can use sandpaper to sand it. Screw-in all studs by hand, making sure the studs are properly routed through the lug holes of the hub. Using a 6mm hex socket and a torque wrench, tighten all studs to 20 Nm (14.75 Ft-lbs). Please note that this step may require another person to depress the brake pedal and lock the front wheels under tight. If you need to install wheel spacers, this step is an excellent time to do so.
Step 4:
Install the front rim back and screw the lug nuts on by hand, using a 19mm socket and a torque wrench to tighten the nuts one by one in a diagonal order, with a recommended torque of 140Nm (102.941 Ft-lbs).
Step 5:
Repeat the same operation in the remaining three rims, and finally drop the vehicle and remove Jack to complete the installation.
Where Can I Buy Wheel Stud Conversion Kit?
As an independent company specializing in the design and production of vehicle parts, BONOSS can provide customers with high-quality and superior performance of stud conversion kits, BONOSS will follow your order for the stud conversion kit, in the factory to produce products that meet your requirements, through the transport agency directly to the latest stud BONOSS will take care of the after-sales service after your purchase, if you have any questions about the purchased stud conversion kit, BONOSS will provide you with solutions.
At BONOSS we value quality and our products are sent to SGS, TUV, and other testing institutes for quality testing, we want our products to be recognized and trusted by more people than huge sales, by visiting any of the distributors listed here you can be sure you will receive the highest standards set by BONOSS Company.
