One of the most popular modifications for the 2024-2025 Xiaomi electric car is adding Xiaomi SU7 wheel spacers. The wheel spacers have been widely used as a cost-effective practice among many outdoor enthusiasts. They can improve the look of your ride by moving the wheels out to be flush with the fender wells. If you intend to get the best Xiaomi SU7 spacers, here is a guide to help you find the perfect wheel spacers.
This Xiaomi SU7 fitment guide covers factory flush spacer sizes, bolt pattern (PCD), center bore (CB), offsets, and spacer selection for you.
- Here are the OEM sizes of this car:
- Flush wheel spacer size: front 15mm / rear 15mm
- Bolt pattern (PCD): 5×114.3mm
- Center bore size: 64.5mm
- Lug nut spec: M14x1.5mm
If you have installed aftermarket wheels, coilovers, or aero fenders, you’ll need to be cautious when choosing a set of wheel spacers. It requires some basic measurement. Take a straight edge and place it against the outermost part of the rims/tires, then measure from the outside wheel to the fender line. If the value is about 15mm, then 15mm wheel spacers provide a perfect flush stance.
What Size Wheel Spacers Are on the Xiaomi SU7?
In the market, the sizes of Xiaomi SU7 wheel spacers are available in 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, and above. New wheel spacers for your Xiaomi SU7 can range in cost from $122.99 to $258.99+, depending on the spacer size and material you select. Giving an example, in the same 6061-T6 material, a pair of 15mm SU7 wheel spacers is $122.99, and a pair of 20mm spacers will be $128.99.
What is the Torque Spec of Xiaomi SU7 Wheel Spacers?
The REFERENCE torque spec of the Xiaomi SU7 wheel spacer would be 103.5Ft-lb (140NM) (always inquire with a tire expert before operating). The wheel spacers should be centered once they are torqued down. Double-check whether all lug nuts are tightened to the manufacturer’s specification with a properly calibrated torque wrench. It is always a great idea to regularly inspect torque specs before and after each trip, regardless if you have spacers or not.
If you need performance wheel spacers, BONOSS forged active cooling Xiaomi SU7 wheel spacers are here for you. As a professional wheel spacers manufacturer, BONOSS created the Global Pioneer Active Cooling Technique. The special petal-shaped grooves utilize the rotation of the spacers to allow the external cold air to enter and continuously flow inside the spacers, enhancing the heat dissipation of the braking system. This is effective in improving the heat dissipation of the brake system, reducing brake fade.
What is the Bolt Pattern on a Xiaomi SU7 Spacer?
The 2024-2025 Xiaomi SU7 comes with a 5×114.3mm bolt pattern. What wheel spacers fit on a Xiaomi SU7? The 5×114.3 lug pattern is easily the most popular bolt pattern out there. That means you can easily find the new spacers for your electric car. Generally, specific hub-centric spacers can perfectly sit on the vehicle hub, meaning no extra stress, hence there is less chance of vibration.
It is worry-free to use genuine brand Xiaomi SU7 wheel spacers. For example, derived from our 10+ years of practical measurement experience, countless times of actual measuring, drawing updates, size precision upgrades, and installation tests, BONOSS has built a database of each vehicle selling on the market, and it’s still being updated continuously. Products designed with precise data not only offer a perfect install experience but also guarantee safety.
These BONOSS forged active cooling Xiaomi SU7 wheel spacers are CNC machined, precision at 0.02mm tolerance. High-precision wheel spacers are easier to sit flush up against the vehicle hub and wheel. So, there’s no obvious gap between the wheel hub and the spacer. This is helpful to avoid high-speed wheel vibration. As long as you torque them properly, BONOSS forged active cooling Xiaomi SU7 wheel spacers are very safe at high speed.