BONOSS Forged Active Cooling Wheel Spacers Jeep Wrangler JL wheel spacers 5×127 71.5mm M14×1.5 by rongyan.2

As you install Jeep Wrangler JL wheel spacers to achieve certain purposes on your vehicle, don’t forget to re-torque the matching lug nuts on the wheel spacers and the factory Jeep Wrangler JL lug nuts on the wheels.

What Should Jeep Wrangler JL Wheel Spacers Be Torqued To?

 The torque applied on the Jeep Wrangler JL wheel spacers depends on the thread type of the Wrangler JL lug nuts. M14×1.5 thread type means recommended torque can be nearly 140Nm. You don’t need to worry about the specified torque since the torque wrench will tell you as you hear the ‘Click’.

Some Wrangler owners will be confused if the torque on Wrangler JL wheel spacers is the same as what is applied on the Wrangler JK. The fact is the thread type of Jeep Wrangler JK is 1/2’’ – 20UNF, so the corresponding torque can be adjusted to the range of 120-130Nm.

How Often Should You Torque Jeep Wrangler JL Wheel Spacers?

 After the first time of installing Jeep Wrangler JL wheel spacers, you should recheck the torque of them every 6000 miles, especially before and after an off-road adventure. The more attention you pay Jeep Wrangler JL wheel spacers, the safer you will be.

Just like any other parts on your vehicle, wheel spacers also need regular checks and maintenance. The specific lifetime of the Jeep Wrangler JL wheel spacers depends on the quality and using conditions. Make sure what you get is made of high-performance Aluminum alloy and is designed as hub-centric, which can avoid most of the vibration or damage problems.

How To Improve The Safety Of Jeep Wrangler JL Wheel Spacers?

As what’s mentioned above, ensuring the Jeep Wrangler JL wheel spacers are torqued with specified torque and given regular check are essential to driving safety. There are also other points that can help increase the safety of driving.

Accurate specs. The more accurate the Jeep Wrangler JL wheel spacers are customized according to the factory axle specs, the more stable connection among the axle, spacers, and wheels you will get. The bolt pattern of the Jeep Wrangler JL is 5×127 – 71.5mm – M14×1.5 – Lug Nuts. The wheel spacers should be customized as accurately as the original specs.

Correct installation. The installation of the Jeep Wrangler JL wheel spacers directly determines the performance of the spacers. The rust on the axle must be removed before installing the spacers, otherwise, vibration issues or insufficient torque problems will be caused.

To get a better off-road experience with higher safety, you need to carefully tighten your Jeep Wrangler JL wheel spacers. If you need other about off-road or wheel spacers, you could take part in the off-road society and dive into it!

Jeep Wrangler JL wheel spacers 5×127 71.5mm M14×1.5