The socket size of a 2014 Subaru WRX lug nut is 3/4", so you would need a 19mm hex socket to fit. Replacing the stock wheel nuts with

There are 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, and 50mm wheel spacers available for 2003-2025 Mazda3 16”-18” rims. Getting the best spacers is beneficial for your Mazda3

The REFERENCE torque spec on the lug nuts on a 2015 Subaru WRX is 120 Nm. For most Subaru cars, the wheel nuts are among the most important

In most cases, the Honda Civic rim spacers can fit a Mazda Mazda3, especially if the bolt pattern, center bore, and offset are the same. However, it’s always

If you get 5-10mm Mazda 3 spacers installed, yes, you need longer wheel studs to properly secure the wheels. Tire engineers explain that only if the bolt thread

In the market, there are three types of lug nuts on a Mazda Mazda3: steel nuts, aluminum nuts, and Titanium nuts. Most people upgrade and modify their wheels

The thread sizes of Mazda wheel nuts will still be M12x1.5mm. When replacing the OEM wheel nuts, there are two factors you need to know. The first one

The most common thread size of 2003-2025 Mazda Mazda3 lug nuts is M12x1.5mm. Since aftermarket lug nuts are made by different manufacturers, there are various options. Choosing the

The bolt pattern on a 2003-2025 Mazda 3 spacer is 5x114.3mm or 5x4.5”. When upgrading with wheel spacers, a vehicle-specific set is always the best option. As long

If your Mazda car comes with OEM locking wheel lug nuts, then a special key may be stored in the glove compartment, center console storage, storage box, or

In fact, it is not necessary to cut the stock studs for Mazda 3 spacers. It depends on how many wheel pockets you have. Take a look at

The lock nut size on a Mazda Mazda3 is M12x1.5mm thread pitch, 21mm hex socket. Wheel locks are a good idea to protect your nice wheels from being

If your Mazda 3 comes with the wheel locks, then you can find them on the wheels. The wheels may be the most difficult item to secure on

Yes, almost all Mazda lug nuts are metric. For example, the most common metric thread sizes of Mazda stud nuts are M12x1.5mm. A M12 means the width of

The REFERENCE torque spec for lug nuts on a 2003-2025 Mazda Mazda3 BK/BL/BM/BN/BP will be 108 - 147 NM. Please note that different wheel nuts need different torque

Countless successful cases prove that wheel spacers are safe for a Toyota Tacoma. During the installation, tighten the wheel nuts to the correct foot-pounds of force with a

The lug nut pattern of a Toyota Tacoma spacer can be 6x139.7mm and 5x114.3mm. Based on the manufacturing process, there are two main types of wheel spacers: forged

No, not all Tacoma and Tundra lug nuts are the same. The most common thread size of a Tacoma lug nut is M12x1.5mm while the common thread size

The most common size of the lug nuts on an OEM Toyota Tacoma is M12x1.5mm thread pitch, 13/16" hex, flat seat with a washer. Since aftermarket wheels come